You need: Ribbon, wooden plugs, glue gun, hair clips double elastic or metal poles, 2 or more pins
1. Gather ribbon in the color you want your strings to be. Use 3 mm if you are making bows for girls younger and 5mm use if you are making bows for baby girls or more.
Get wooden dowels of various diameters. Anchors will very thin curls and are usually used 3mm tape. Anchors make it thicker and thicker locks are used by 5mm strip. Really you can use any combination you want.
2. Adhere the tape to the ankle with a straight pin. Wrap the strap around the ankle and respect the other end with a straight pin.
3. Wrap with tape as many pieces as you want with different colors for each piece. Place the pieces on a cookie sheet. Put the pieces in the oven at 200 degrees for 20 minutes to heat.
4. Remove the tape from the ankle and cut the ribbon in 3 1/2 to 4 inch strips.
5. If you use elastic them you need now. Take 3 pieces of ribbon and tie all around the elastic to tie a knot. Once it's on the elastic take the glue gun and put a drop of glue on the knot to make sure that it will not come undone.
If you use the clip pole double draw only the three pieces together in a knot around nothing.
6. If you are the strings attached to the elastic, keep repeating step five until you have about your elastic hooks 10, or however many you want. Once that is done to put the nodes around the elastic, it is possible to scoot nodes close to each other so that you can’t see the nodes from the top view. You are finished!
If you are doing the guy with the clip, you need to make about 10 groups of nodes. Next grab your clip and glue a piece of tape covering the top of the clip. (See picture) Then start gluing the nodes on the tape on top of the clip. When you get a full clip, you're finished. Be careful not to paste the clip closure, while pasting nodes. Have fun!
No comments:
Post a Comment